Setting up an OpenVPN Server

In last week’s blog article, I discussed what a VPN is, and why you might want to install a VPN client on your computer.  This week, I will be discussing the other side of things – installing a VPN server on a Linux computer.

We discussed how a VPN can help with security.  The assumption was that you have a server – provided by either an employer or a commercial VPN provider – that you connect to.  But what if you yourself provided the server that your remote PCs connect to?  Why would you want to do that?  There are several reasons.

Why Run a VPN Server?

  1. You do not trust the VPN provider.  By running your own VPN, you can secure your traffic from public WiFi networks by redirecting it through your home network, without being concerned that the VPN provider itself might be monitoring your traffic.
  2. You wish to save on the cost of a VPN.  If you already have a server running all the time at home, why not make it a VPN server instead of paying a commercial VPN provider for one?
  3. You wish to access applications running on your home network remotely, but don’t wish to open up a bunch of holes in your firewall to allow you to access them remotely.

I recently faced #3.  I wanted to be able to use my Asterisk server – on my home network – while traveling with my laptop computer.  As well, I wanted to be able to access a telephony database running in MySQL.

Just Forward the SIP Protocol Through the Firewall?

The usual way to allow remote access to an application on your home network is have your router forward the ports used by the application to the machine running the application.  While this is an okay solution for some simple protocols, I felt doing this with the SIP protocol used by my VoIP phone would be problematic.

First of all, allowing the SIP protocol through a firewall requires opening not just one port, but several different ranges of ports.  And because the application generating SIP packets (Asterisk in this case) includes the IP address in the metadata of each packet, arrangements also have to be made to have this address translated from the internal IP address to the external address on the other side of the network firewall.  Doing this requires additional configuration not only of the firewall, but of the application itself.  Once the call itself is set up, a separate protocol caries the audio for a phone call, again requiring more ports to be opened in the firewall, and additional IP address translation in the application.  Getting SIP to work through a firewall is known by many to be a time-consuming and often frustrating ordeal.

But even neglecting the difficulty in getting SIP to work through a firewall, opening a firewall to SIP traffic can result in a high volume of hacking attempts.  I once opened up a single SIP port (5060) on a commercial server in order to make VoIP services available externally.  Within hours of opening this port, I had received hundreds of hacking attempts.  These attempts, which came from multiple locations, continued in subsequent days.  While I did secure the server well, and there were no successful hacks, having hackers constantly pounding on the server trying to get in is not a good thing.  It consumes bandwidth, wastes processing power, and there’s always the chance the a hacker eventually succeeds in gaining access.

In fact, SIP services are among the top targets for hackers at present.  This may seem counter-intuitive.  With even international phone calls dirt-cheap these days, why would there be so much effort made to gain access to a phone system to commit toll fraud?  I think what the hackers are looking for is not so much saving money on phone calls, but instead gaining anonymity.  They wish to make “spam” calls that cannot be traced back to them.

No – Use a VPN Server Instead

Based on both the difficulty of setup, and the attractiveness to hackers, I decided it would not be a good idea to allow direct access to my telephony server.  But what I could do is run a VPN server on my network.  This would allow me to connect to applications such as Asterisk (my SIP server) and MySQL (my database server) remotely just as easily as if I was at home (once the VPN connection is established).  By running OpenVPN, I would also only need to open access to a single network port – not the multiple ports required for SIP and other applications.  And since OpenVPN makes use of certificates, hackers not possessing such a certificate would not be able to hack into the server – no mater how many passwords they tried.

Setting up OpenVPN Server

Since there are plenty of good tutorials already online, I won’t go into the details of setting up the OpenVPN server, other than to briefly note how I resolved a couple of issues I ran into.  The OpenVPN site itself has a good tutorial.  I also found this article helpful.

The setup went pretty much as described by the above sources, with the exception of two issues.

The first issue was that, although I could connect to the OpenVPN server itself, I was not able to connect to other machines on my home network.  The articles mention the need to turn on IP Forwarding, which I had done.  However, another thing not mentioned directly in the articles that is necessary is to add a route to other machines from the VPN server by using iptables.  Adding this route allowed me to connect to any machine on my network.  However, changes made to iptables are lost upon system reboot.  So the first time I rebooted the VPN server, I was again no longer able to connect to other machines on my network through the VPN.  I found a package called iptables-persistant (this is the package name for Debian Linux – other Linux distributions may have a similar package with a different name) that makes iptables changes persist between reboots.  Once I re-added the route to other machines and installed this package, access to other servers on my home network again works, and continues to work even after rebooting the VPN server.

Results

I am now able to connect to my home Asterisk VoIP server from a soft phone client on my laptop.  I am able to make an receive calls without any issues.  I even found an OpenVPN client and a soft phone that run on my iPhone, so I am able to use the full functionality of my home VoIP setup no matter where I travel.  I am also able to connect to MySQL Server, and to other applications located on other machines on my home network.

Best of all, if I later wish to connect to new servers or applications on my home server, no additional setup will be required.  And I only have a single port (one that runs a protocol that requires a certificate to successfully access) exposed on my home network.

 

Leave a Reply

Your email address will not be published. Required fields are marked *